Municipal Corporation

Municipal Corporation has published Providing and Fixing ofOpen Air Gym Equipments in the main park of 3 BHK Sector -63, Block 18 Opposite of Flat No.2035, Chandigarh under M.P.LADS. (Work No.5/18th LS)-Push Chair – ODF 001Functions: Developing the strength of upper limbs, chest and muscle groups of shoulder and back, improving the flexibility and stability of shoulder joints and elbows. Good for healing the bending and stretching hindrances of shoulder joints and elbows, muscular atrophy, frozen shoulder, tennis elbows, etc.Approaches Sit down with your back against the equipment and take hold of the handgrips with both hands and push forward with effort till your arms extend straight. Revert slowly.Size:-2265x662x2010mmMaterial: Pre Galvanized Mild Steel, Material Thickness: 3 mm.Paint: All Weather Double Layer Powder Coated PaintSealedBall Bearing,Steel Seats for long lastinglife 2 Surf Board By swinging both legs together from side to side the Surfing Board strengthens and develops the lower abdomen hips and thighs, improves balance and co-ordination through “core” activation Approaches: Stand on the pedals and grasp the handles with both hands, swing from left to right. Size:-1020x800x1480 mmMaterial: Pre Galvanized Mild Steel, Material Thickness: 3 mm.Paint: All Weather Double Layer Powder Coated PaintSealedBall Bearing, Streel Footrest/Foot paddle for long lasting life. 3 Space Walker –.SPACE WALKER complete in all respects having following specifications.All pipes should used in the equipments should be galvanised with 3mm thickness.Multi Colour Powder coating with polyster paints should be used on all the equipments.The foot pedal on all the equipments should be of aluminium only.The seats should be made of high quality plastic with colour scheme in yellow or orange.The high end bearings such as SKF/NBC must be used in all the equipments.1 Dimensions- 1100*460*1480mm2 Colour- customizable multi colour and complete powder coat3 Size of main tube-114*3.75mm steel pipe4 Size of supporting tube-38*3mm steel pipe5 There is restrainer inside, swing lever is not more than 65degrees and having swing rod is made of 3mm steel tube.6 Al alloy protecting covers are used at the top other main tubes to protect from the rainwater7 Anti-skid components are used at the pedal parts, the resistance index is greater than 0.5mm8 The distance between two pedals of the adjacent motion is no less than 100mm.9 Anti theft cover is made by stainless steel/high quality plastic10 The minimum height of the edge of swing component is not less than 80mm11 Hazardous materials like coating agent, rubber are under national newest standard.12 Radius of edge is no less than 3.0 mm.13 The diameter of rotating shaft is not less than40mmFunctions: The Leg & Thigh Exerciser provides excellent cardiovascular exercise while developing the leg muscles. Allows a full range of movement in the hip joint improving flexibility and strength, without any impact or stress to joints and back. Suitable for all ages. Approaches: Hold the crossbeam with both hands and swing your legs backwards and forwards in a walking motion. 4 Seated Pedal Trainer – LEG SHAPER complete in all respects having following specifications.All pipes should used in the equipments should be galvanised with 3mm thickness.Multi Colour Powder coating with polyster paints should be used on all the equipments.The foot pedal on all the equipments should be of aluminium only.The seats should be made of high quality plastic with colour scheme in yellow or orange.The high end bearings such as SKF/NBC must be used in all the equipments.1 Dimensions- 1730*450*1450mm2 Colour- customizable multi colour and complete powder coat3 Size of main tube-114*3.75mm steel pipe4 Size of supporting tube-76*3mm steel pipe5 There is restrainer inside, the distance between swing arm and main tube is greater than 230mm avoiding the danger of getting stuck.6 Al alloy protecting covers are used at the top other main tubes to protect from the rainwater7 Anti-skid components are used at the pedal parts.8 The distance between two spinners is no less than 230mm, avoiding the damage of being stuck9 Anti theft cover is made by stainless steel/high quality plastic.10 Thickness of bearing bracket is no less than8mm11 Hazardous materials like coating agent, rubber are under national newest standard.Functions: Develops the strength of lower limbs, and improves the stability and agility of three main joints of lower limbs; good for the healing of inconvenience of bending and stretching of lower limbs, and muscular atrophy of lower limbs, rheumatoid arthritis, sciatica, sprain of the anklebone, etc. Approaches: Sit on the chair and step on the footboard. Stretching legs with force and recover slowly. Repeat. Users: Suitable for people of different ages. 5 Wab Board.WAB BOARD complete in all respects having following specifications.All pipes should used in the equipments should be galvanised with 3mm thickness.Multi Colour Powder coating with polyster paints should be used on all the equipments.The high end bearings such as SKF/NBC must be used in all the equipments.Wab Board or Abbs ShaperSize:-972x980x462 mm Two Wab Boards are raised on the pendulum pillar for exercising and agility of the abdomen and muscles. Functions: Developing the strength and flexibility of lumbar and abdominal muscles consuming the fat in waist and abdomen, good for figure shaping and bodybuilding. 6 Taiji Wheel. TAIJI WHEEL complete in all respects having following specifications.All pipes should used in the equipments should be galvanised with 3mm thickness.Multi Colour Powder coating with polyster paints should be used on all the equipments.The high end bearings such as SKF/NBC must be used in all the equipments.1 Dimensions- 1300*1050*1450mm2 Colour- customizable multi colour and complete powder coat3 Size of main tube-114*3.75mm steel tube4 Size of supporting tube-30*3mm steel tube5 Radius of edge is no less than 3.0 mm.6 Al alloy protecting covers are used at the top other main tubes to protect from the rainwater7 There are damping materials inside the rotating parts.8 The distance between two spinners is no less than 230mm, avoiding the damage of being stuck9 Anti theft cover is made by hard plasticFunctions: Develops the strength of upper limbs, shoulder and chest, strengthening cardiac and pneumonic functions. Approaches: Hold the crossbars tight with your hands and lift yourself up, then using the strength of your arms to do the pull-up action. Repeat according to your physical conditions. Users: Suitable for middle-aged people and youths. 7 Provision for fixing of gym equipments in cementconcrete 1:2:4 Blocks of size 5’x5’x1 ¼ ‘ to the entire satisfaction of the engineer-in-charge . Last date of submission for this tender is 2025-03-11. This is a Gym Equipment tender in Chandigarh, Chandigarh