Chandigarh Administration Engineering Department

Chandigarh Administration Engineering Department has published Tender For Annual Repair To Rb Type-9 Sector-7, Chandigarh.--- 1 Providing And Laying In Position Cement Concrete Of Specified Grade Excluding The Cost Of Centering And Shuttering - All Work Up To Plinth Level :1:5:10 ( 1 Cement : 5 Coarse Sand ( Zone-Iii ) Derived From Natural Sources : 10 Graded Stone Aggregate 40 Mm Nominal Size Derived From Natural Sources ) 2 Brick Work With Common Burnt Clay F.P.S. ( Non Modular ) Bricks Of Class Designation 7.5 In Superstructure Above Plinth Level Up To Floor V Level In All Shapes And Sizes In :Cement Mortar 1:4 ( 1 Cement : 4 Coarse Sand ) 3 Providing And Fixing Ist Quality Ceramic Glazed Wall Tiles Conforming To Is: 15622 ( Thickness To Be Specified By The Manufacturer ) , Of Approved Make, In All Colours, Shades Except Burgundy, Bottle Green, Black Of Any Size As Approved By Engineer-In-Charge, In Skirting, Risers Of Stepsand Dados, Over 12 Mm Thick Bed Of Cement Mortar 1:3 ( 1 Cement : 3 Coarse Sand ) And Jointing With Grey Cement Slurry @ 3.3Kg Per Sqm, Including Pointing In White Cement Mixed With Pigment Of Matching Shade Complete. 4 12 Mm Cement Plaster Of Mix : 1:4 ( 1 Cement: 4 Fine Sand ) 5 Removing Dry Or Oil Bound Distemper, Water Proofing Cement Paint And The Like By Scrapping, Sand Papering And Preparing The Surface Smooth Including Necessary Repairs To Scratches Etc. Complete. 6 Wall Painting With Plastic Emulsion Paint Of Approved Brand And Manufactureto Give An Even Shade :One Or More Coats On Old Work 7 Painting With Synthetic Enamel Paint Of Approved Brand And Manufacture Of Required Colour To Give An Even Shade : One Or More Coats On Old Work 8 Finishing Walls With Acrylic Smooth Exterior Paint Of Required Shade : Old Work ( One Or More Coat Applied @ 0.90 Ltr / 10 Sqm ) . 9 Preparation Of Plastered Or Concrete Surfaces For Oil Bound Distemper Or Emulsion Or Apex Paint Including Sand Papering The Surface Or Scrapping By Patti, Applying Filling With Cement Based Putty ( Birla, Jk Or Equivalent ) To The Required Finish Complete In All Respect And To The Entire Satisfaction Of Engineer-In-Charge. 10 Providing And Fixing 15 To 18Mm Thick Gang Saw Cut, Mirror Polished, Premoulded And Prepolished, Machine Cut For Kitchen Platforms, Vanity Counters, Window Sills , Facias And Similar Locations Of Required Size, Approved Shade, Colour And Texture Laid Over 20 Mm Thick Base Cement Mortar 1:4 ( 1 Cement : 4 Coarse Sand ) , Joints Treated With White Cement, Mixed With Matching Pigment, Epoxy Touch Ups, Including Rubbing, Curing, Moulding And Polishing To Edges To Give High Gloss Finish Etc. Complete At All Levels. Granite Of Any Colour And Shade Area Of Slab Over 0.50 Sqm 11 Steel Work In Built Up Tubular Ms ( Round, Square Or Rectangular Hollow Tubes Etc. ) Trusses Etc., Including Cutting, Hoisting, Fixing In Position And Applying A Priming Coat Of Approved Steel Primer, Including Welding And Bolted With Special Shaped Washers Etc. Complete. 12 Providing And Fixing Golden Champ Wood Chowkhat ( Kiln Seasoned ) 4 1 / 2 X 2 1 / 4Including Cost Of Corner Straps, Iron Hold Fasts, Hinges, Screws, Nails, Fevicol Etc. And Painting Two Coats Of Wood Preserver To Sides Of Chowkhats. Rate Includes The Cost Of Dismantling Of All Damaged Chowkhats And Making Good The Damage To Walls Plaster And Floors As Required Including, Refixing Of Grills, Disposal Of Rubbish To The Dumping Ground The Rate Further Includes The Cost Of Painting Two Coats Synthetic Enamel Paint Over One Coat Of Wood Primer Complete In All Respect And To The Entire Satisfaction Of Engineer-In-Charge. 13 Providing And Fixing 35Mm Thick Phenol Bounded Factory Manufactured Solid Flush Door Shutter Isi Marked With Both Side Commercial Face In The Existing Chowkhat.The Rate Includes The Cost Of Iron Hinges, All Necessary Alum. Fitting And Painting Two Coats Over One Coat Of Primer After Preparation Of Surface ( Special Quality ) Complete In All Respect To The Entire Satisfaction Of Engineer-In-Charge. 14 Providing And Fixing 35Mm Thick Golden Champ Wood ( Kiln Seasoned ) Wire Gauge Door Shutter Consisting Of 100Mm X 35 Mm Style And Top Rail 150 Mm X 35 Mm Lock Rail 200Mm X 35 Mm Bottom Rail Wire Mesh 22 X 12 Mm Gauge Fixed With 1 / 2” X 3 / 4” Golden Champ Wood ( Kiln Seasoned ) Beading, With Two Vertical Members In Each Panel To Hold Wire Mesh, With Necessary 4 Nos. Of Hinges 4, 2 Aluminium Tower Bolts 8, 2 Aluminium Handles 5” And Aluminium Door Stopper And Single Acting Door Spring And Complete Fixed In Position Including Two Coats Of Paint And One Coat Of Primer After Preparation Of Surface ( Special Quality ) Complete In All Respect To The Entire Satisfaction Of Engineer-In-Charge. 15 Providing And Fixing Golden Champ Wood Jaffery On Compound Wall With Frame Of Hard Wood Section 2” X 1.3 / 8” As Horizontal Member And Vertical Members Fixed With Hard Wood And Strips 4”X 3 / 8” @ 6” C / C On Both Faces Sides Faces Of Jaffery. The Top Of Jaffery Is To Be Covered With Another Strip Of 2 X 1.3 / 8”.The Complete Panel Is To Fixed Over Existing Wall And M.S. Angle With Iron Nuts And Bolts Etc.The Complete Jaffery Is To Be Painted With Special Quality Over One Coat Of Primer Complete In All Respect To The Entire Satisfaction Of Engineer-In-Charge. 16 Providing And Laying 40Mm Thick Factory Made Cement Concrete Rubber Moulded Interlocking Paver Block Made With Ratio 1:1:2 By Block Making Machine With Strong Vibratory Compaction And Of Approved Size And Design / Shape Laid In Required Colour And Pattern Over And Including 30Mm Thick Compacted Bed Of Course Sand, Filling The Joints With Fine Sand Etc All Complete As Per Direction Of Engineer-In-Charge 17 Providing And Fixing 2-0” Deep Cupboard / Cabinet Consisting Of 19Mm Thick Commercial Board And 6Mm Thick Ply On Back Side, 1Mm Thick Teak Ply Pated On The Exposed Surface And Making Shelves In Cabinet, . The Rate Further Includes The Cost Of Lipping Piano Hinges, , Cupboard Lock, Screws, Nails, 2 Nos. Fancy S.S. Handles, 2 Nos. Magnetic Catchers, Fevicol And Paintingtwo Coats Over One Priming Coat And Preparation Of Surface On Board And Ply Surfacecomplete In Position To The Entire Satisfaction Of Engineer-In-Charge. 18 Providing And Fixing 1.5Mm Thick Polycarbonate Sheet To Be Fixed On The Existing Ms Frame With Self Drilling Machine Screws Complete In All Respect To The Entire Satisfaction Of Engineer-In-Charge.. Last date of submission for this tender is 2023-03-31. This is a Construction Material tender in Chandigarh, Chandigarh