Department Of Industries And Commerce

Department Of Industries And Commerce has published Procurement Of Advanced Toolkits For Handicraft And Furniture Making ( Package 1 ) -1 ADVANCED TOOLKIT SET FOR BAMBOO FURNITURE- Bevel / Square Chisel ½ inch &1 inch nSpecifiction: Single Bevel Sweep Straight Chisel, Sqaure Tang Handle, Cr-Vd Steel, Hand Sharpened, 12mm & 25 mm 2 Wood handle hacksaw with extra blades nSpecification: 300 mm Wood handled hacksaw with one extra blades 3 Ball peen Hammer 250 Gm. With Wood Handle 12 inches nSpecification: Forged from High Grade Carbon Steel, Handle of seasoned hard wood, Head is Powder Coated & Lacquer polished, Handle is Laquer Coated, Handle Lenth 12, weight: 9 OZ 4 Measuring Tape 3 meters nSpecification: Length of tape: 3mtr, width: 16 mm, Accuracy at 20 degrre Centigrade and tension of 50N, Compact Size 5 Steel Scale 12 inches & 24 inches nSpecification: Stainless steel 202 grade sacle ruler 30 cm & 60 cm, with inside edges polished and grinded,Front edge 1/2 mm, Bottom edge 1/16ths,1/32nd,1/64ths, width 25 mm,Reverse side : conversion table ,Inch to mm 6 Triangular File for sharpening Saw Blade, Length 6 inches, Width 4 mm nSpecification: Three sqaure 2nd Cut File with handle, Size: 150 mm 7 Tri-square 6 inches nSpecifiction: Try Square, weight : 170 gm, length: 150 mm, Stainless steel blade 202 grade 8 Angle finder – Arm rule nSpecification: The Protractor has easy etched reading graduations from 0-180 degrees on opposite direction , Angle Finder Arm has graduations with the range of 0 to 140 mm , Made of Stainless Steel, Elegant Design ,Accurate Graduation and Polished finish. 9 Bamboo Splitting knife ( Dau) nSpecification: Steel DAU ,local made with wooden Handle 10 Combination Stone 150 mm x50 mm x 20 mm Specification: Grit 120/c240/WA600, Size: 6 x 2 x 1, High strength, smooth surface, 11 Cutting pliers nSpecification: 200 mm, Made from Cr-vd material 12 Screw driver set nSpecification: Kit Comprising of 5 pcs with neon bulb 13 Hand plainer (small) nSpecification: 125mm or 5, Hand Block Planer 14 Power drill nSpecification: 10 mm Impact Drill Machine n nRated Input Power-450 Watts, No Load Speed- 0-2600 RPM, Power Output- 250 Watts, Weight- 2.5 Kg, Power Outpur-250 Watts, Weight according to EPTA Procedure 01:2014 should be <=1.5 Kg, Drill Spindle Connecting Thread- 3/8”-24 UNF, Chuck Capacity-1 -10mm, width- 69mm, lenth-262 mm, height- 180mm, Impact Rate-0-41,600 bpm. nDrill capacity- brickwall/light density concrete- 10mm, sheet metal- 8mm, wood- 20mm. It should include a cloth wrapper for ergonomic holding of necessary accessories. nAccessories set includes- 4 concrete, wood and metal drill bits, 10 screwdriver bits, 30 screws and nylon plugs n 15 Hand held angle grinder 4 inch nSpecification: 100mm Angle Grinder n nAngle Grinder 100 mm having Rated Input Power-660 Watts of No-Load Speed- 11,000 rpm, output power-405 Watts, Grinding Spindle Thread-M10, Length- 270 mm, Height-80 mm, Weight according to EPTA Procedure 01:2014 with standard auxillary handle should be <=1.7 Kg with double insulation and durable on-off back switch. Testing standard for the tool should be according to (EN 55014-1,2, A1,A2), (61000 3-2, 3-3), (CISPR 14-1,2,A1,A2), (IEC 61000 3-2, 3-3). nAccessories- protection guard, clamping flange, locking nut, wrench n 16 Hot Air Gun nSpecification: Variable Airflow: 350, 350, 550 lt/min , corresponding temperature at nozzle outlet- 60, 350, 550 degree celcius: , Power input 1800 watt with overheat protection, Voltage 230V, weight according to EPTA Procedure 01:2014 should be <= 0.75 kg. Width-83 mm, Length-238 mm and Height- 244 mm, Sound Pressure should be less than 70 db, should have a flat surface at the back for keeping the tool on the ground in idle condition, Accessories- Reduction Nozzle 17 Drill bit set nSpecification: Twist Drill Bit set 10 pcs, Hi Speed Steel Drill Bit Set Range 1mm - 10 mm, Metal Drill Bits with A-Tip with 135 degree tip angle 18 Gas blow torch complete set ready to use Specification: Butane Gas Blow Torch,125 gm, 19 Fastener drill bet set nSpecification:chisel head drill bit set 20 Bag for tools nSpecification: High Grade waterproof material, Size: 450mm x 230 mm x 300 mm or Big Size , tool bag to keep all tools of this package 21 IMPROVED TOOLKIT SET FOR HANDICRAFTS ACCESORY PRODUCTS-- Bevel / Square Chisel 1/2 inch & 1inch Specification:Single Bevel Sweep Straight Chisel, Sqaure Tang Handle, Cr-Vd Steel, Hand Sharpened, 12mm & 25 mm 22 Wood handle hacksaw with extra blades Specification: 300 mm Wood handled hacksaw with one extra blades 23 Fret saw (hack saw – small) nSpecification:A Flat bar Frame with dura Steel Pins, Hi Speed Steel Blade 24 Ball peen Hammer 250 Gm. With Wood Handle 12 inches nSpecification:Forged from High Grade Carbon Steel, Handle of seasoned hard wood, Head is Powder Coated & Lacquer polished, Handle is Laquer Coated, Handle Lenth 12, weight: 9 OZ 25 Measuring Tape 3 meters nSpecifcation:Length of tape: 3mtr, width: 16 mm, Accuracy at 20 degrre Centigrade and tension of 50N, Compact Size 26 Steel Scale 12 inches nSpecification:Stainless steel 202 grade sacle ruler 30 cm, with inside edges polished and grinded Front edge 1/2 mm, Bottom edge 1/16ths,1/32nd,1/64ths, width 25 mm, Reverse side : conversion table ,Inch to mm 27 Triangular File for sharpening Saw Blade, Length 6 inches, Width 4 mm nSpecification:Three sqaure 2nd Cut File with handle, Size: 150 mm 28 Tri-square 6 inches nSpecification: Try Square, length: 150 mm, Stainless steel blade 202 grade 29 Angle finder – Arm rule nSpecification:The Protractor has easy etched reading graduations from 0-180 degrees on opposite direction , Angle Finder Arm has graduations with the range of 0 to 140 mm , Made of Stainless Steel, Elegant Design ,Accurate Graduation and Polished finish. 30 Bamboo Splitting knife ( Dau) nSpecification: Steel DAU ,local made with wooden Handle 31 Combination Stone 150 mm x50 mm x 20 mm Specification: Grit 120/c240/WA600, Size: 6 x 2 x 1, High strength, smooth surface, 32 Cutting pliers nSpecification: 200 mm, Made from Cr-vd material 33 Screw driver set nSpecification: Kit Comprising of 5 pcs with neon bulb 34 Hand planner (small) nSpecification: 125mm or 5, Hand Block Planer 35 Hand held Power Drill nSpecification: 10 mm Impact Drill Machine n nRated Input Power-450 Watts, No Load Speed- 0-2600 RPM, Power Output- 250 Watts, Weight- 2.5 Kg, Power Outpur-250 Watts, Weight according to EPTA Procedure 01:2014 should be <=1.5 Kg, Drill Spindle Connecting Thread- 3/8”-24 UNF, Chuck Capacity-1 -10mm, width- 69mm, lenth-262 mm, height- 180mm, Impact Rate-0-41,600 bpm. nDrill capacity- brickwall/light density concrete- 10mm, sheet metal- 8mm, wood- 20mm. It should include a cloth wrapper for ergonomic holding of necessary accessories. nAccessories set includes- 4 concrete, wood and metal drill bits, 10 screwdriver bits, 30 screws and nylon plugs n 36 Hand held angle grinder 4 inch nSpecification: 100mm Angle Grinder n nAngle Grinder 100 mm having Rated Input Power 660 Watts of No-Load Speed- 11,000 rpm, output power-405 Watts, Grinding Spindle Thread-M10, Length- 270 mm, Height-80 mm, Weight according to EPTA Procedure 01:2014 with standard auxillary handle should be <=1.7 Kg with double insulation and durable on-off back switch. Testing standard for the tool should be according to (EN 55014-1,2, A1,A2), (61000 3-2, 3-3), (CISPR 14-1,2,A1,A2), (IEC 61000 3-2, 3-3). nAccessories- protection guard, clamping flange, locking nut, wrench n 37 Drill bit set nSpecification:Twist Drill Bit set 10 pcs, Hi Speed Steel Drill Bit Set Range 1mm - 10 mm, Metal Drill Bits with A-Tip with 135 degree tip angle 38 Bag for the tools nSpecification: High Grade waterproof material, Size: 450mm x 230 mm x 300 mm or Big Size , tool bag to keep all tools of this package . Last date of submission for this tender is 2021-02-08. This is a Cutting Crimping And Punching Tools tender in Bamunimaidam Ghy, Assam