Hindustan Petroleum Corporation Limited

Hindustan Petroleum Corporation Limited has published Bids Are Invited For Spares For Kepl Pumps - Labyrinth Seal - Coupling Side (Bearing Housing - DE) Part No.: 113- 1 for KEPL Pumps, Model: 350x250 KSM(71L), Mark No: 120-P-202A/B, Serv: HAN at ATP, M/c.No. :95004 & 5, Capacity: 550 m3/hr, Diff.Head:171 M, Imp. Dia.: 684mm, Speed: 1482 RPM, C.S.Drg.No. KS- 202-01-03-SHT2 Deflector - Bearing (Casing Side), Part No.: 93-2 for KEPL Pumps, Model: 350x250 KSM(71L), Mark No: 120-P- 202A/B, Serv: HAN at ATP, M/c.No. :95004 & 5, Capacity: 550 m3/hr, Diff.Head: 171 M, Imp. Dia.: 684mm, Speed: 1482 RPM, C.S.Drg.No. KS- 202-01-03-SHT2 Deflector - Bearing (Casing Side), Part No.: 93-2 for KEPL Pumps, Model: 350x250 KSM(71L), Mark No: 120-P- 202A/B, Serv: HAN at ATP, M/c.No. :95004 & 5, Capacity: 550 m3/hr, Diff.Head: 171 M, Imp. Dia.: 684mm, Speed: 1482 RPM, C.S.Drg.No. KS- 202-01-03-SHT2Deflector - Bearing (Coupling Side), Part No.: 93-1 for KEPL Pumps, Model: 350x250 KSM(71L), Mark No: 120-P-202A/B, Serv: HAN at ATP, M/c.No. :95004 & 5, Capacity: 550 m3/hr, Diff. Head:171 M, Imp. Dia.: 684mm, Speed: 1482 RPM, C.S.Drg.No. KS- 202-01-03-SHT2 Oil Ring, Part No.: 67 for KEPL Pumps, Model: 350x250 KSM(71L), Mark No: 120-P-202A/B, Serv: HAN at ATP, M/c.No. :95004 & 5, Capacity: 550 m3/hr, Diff. Head:171 M, Imp. Dia.: 684mm, Speed: 1482 RPM, C.S.Drg.No. KS-202-01-03-SHT2 Throat Bush, Part No : 082, Matl. : Cr. St. ASTM A276 Type-410(H) for following KEPL Pumps, Model: 80x50UCWM35, Markno:14-P-04 C/D, Serv:Clarified Oil R/D, S.No.: 97031 & 32, Drg.No.KS-440-01-00, Capacity :10 M3/hr. (Normal), Disch. Pressure : 15.65 Kg/cm2, Suct. Pr. : 2.96 Kg/cm2, Speed: 2950 RPM Model:80x50UCWM35, Markno :120- P-208A/B, Serv.: Slop at ATP, CS Drg.No: KS-221-01-01-SHT2, Capacity: 50 m3/hr (Normal), Disch. Pr. at PT (40degC) : 0.5 Kg/cm2, Suct.Pr. : 0.79 Kg/cm2 Case Wear Rings (DE), Part No : 107- 1, Matl. : Cr. St. ASTM A743 Gr.CA40(H) for following KEPL Pumps, Model:80x50UCWM35, Markno:14-P04 C/D, Serv:Clarified Oil R/D, S.No.: 97031 & 32, Drg.No.KS-440-01-00, Capacity :10 M3/hr. (Normal), Disch. Pressure : 15.65 Kg/cm2, Suct. Pr. : 2.96 Kg/cm2, Speed: 2950 RPM Model:80x50UCWM35, Markno :120- P-208A/B, Serv.: Slop at ATP, CS Drg.No: KS-221-01-01-SHT2, Capacity: 50 m3/hr (Normal), Disch. Pr. at PT (40degC) : 0.5 Kg/cm2, Suct.Pr. : 0.79 Kg/cm2 Impeller Wear Rings - DE, Part No : 025-1, Matl. : Cr. St. ASTM A276 - Type-410 (H) for following KEPL Pumps, Model:80x50UCWM35, Markno:14-P-04 C/D, Serv:Clarified Oil R/D, S.No.: 97031 & 32, Drg.No.KS-440-01-00, Capacity :10 M3/hr. (Normal), Disch. Pressure : 15.65 Kg/cm2, Suct. Pr. : 2.96 Kg/cm2, Speed: 2950 RPM Model:80x50UCWM35, Markno :120- P-208A/B, Serv.: Slop at ATP, CS Drg.No: KS-221-01-01-SHT2, Capacity: 50 m3/hr (Normal), Disch. Pr. at PT (40degC) : 0.5 Kg/cm2, Suct.Pr. : 0.79 Kg/cm2 Impeller Wear Rings - NDE, Part No : 025-2, Matl. : Cr. St. ASTM A276 Type-410(H) for following KEPL Pumps, Model:80x50UCWM35, Markno:14-P-04 C/D, Serv:Clarified Oil R/D, S.No.: 97031 & 32, Drg.No.KS-440-01-00, Capacity :10 M3/hr. (Normal), Disch. Pressure : 15.65 Kg/cm2, Suct. Pr. : 2.96 Kg/cm2, Speed: 2950 RPM Model:80x50UCWM35, Markno :120- P-208A/B, Serv.: Slop at ATP, CS Drg.No: KS-221-01-01-SHT2, Capacity: 50 m3/hr (Normal), Disch. Pr. at PT (40degC) : 0.5 Kg/cm2, Suct.Pr. : 0.79 Kg/cm2 Impeller Wear Rings - NDE, Part No : 025-2, Matl. : Cr. St. ASTM A276 Type-410(H) for following KEPL Pumps, Model:80x50UCWM35, Markno:14-P-04 C/D, Serv:Clarified Oil R/D, S.No.: 97031 & 32, Drg.No.KS-440-01-00, Capacity :10 M3/hr. (Normal), Disch. Pressure : 15.65 Kg/cm2, Suct. Pr. : 2.96 Kg/cm2, Speed: 2950 RPM Model:80x50UCWM35, Markno :120- P-208A/B, Serv.: Slop at ATP, CS Drg.No: KS-221-01-01-SHT2, Capacity: 50 m3/hr (Normal), Disch. Pr. at PT (40degC) : 0.5 Kg/cm2, Suct.Pr. : 0.79 Kg/cm2 Impeller Wear Rings - NDE, Part No : 025-2, Matl. : Cr. St. ASTM A276 Type-410(H) for following KEPL Pumps, Model:80x50UCWM35, Markno:14-P-04 C/D, Serv:Clarified Oil R/D, S.No.: 97031 & 32, Drg.No.KS-440-01-00, Capacity :10 M3/hr. (Normal), Disch. Pressure : 15.65 Kg/cm2, Suct. Pr. : 2.96 Kg/cm2, Speed: 2950 RPM Model:80x50UCWM35, Markno :120- P-208A/B, Serv.: Slop at ATP, CS Drg.No: KS-221-01-01-SHT2, Capacity: 50 m3/hr (Normal), Disch. Pr. at PT (40degC) : 0.5 Kg/cm2, Suct.Pr. : 0.79 Kg/cm2Impeller, Part No : 021, Matl. : Cr. St. ASTM A743 Gr.CA15/CA6NM for following KEPL Pumps, Model:80x50UCWM35, Markno:14-P04 C/D, Serv:Clarified Oil R/D, S.No.: 97031 & 32, Drg.No.KS-440-01-00, Capacity :10 M3/hr. (Normal), Disch. Pressure : 15.65 Kg/cm2, Suct. Pr. : 2.96 Kg/cm2, Speed: 2950 RPM Model:80x50UCWM35, Markno :120- P-208A/B, Serv.: Slop at ATP, CS Drg.No: KS-221-01-01-SHT2, Capacity: 50 m3/hr (Normal), Disch. Pr. at PT (40degC) : 0.5 Kg/cm2, Suct.Pr. : 0.79 Kg/cm2 Shaft with Keys, Matl.: Cr.Mo.St. ASTM A434-CL. BB (AISI 4140), P/No. 031, 039.1, 039.2. Kirloskar Ebara Pumps Ltd Model: 80 X 50 UCWM 35, Sr No. 050150, 050151, Mfr Ref.: KEPL / IND / 1151, PO Ref.: 5000288- OW-46009, Dt.08.08.2005, Capacity: 49 M3/Hr, Head: 155 Mt, Speed: 2930 RPM, Power: 37 KW, CS Drg.: KF0011510010100, Eqpt: 015P056 A/B, Service: Recycle Gasoline. Shaft with Keys, Part No. : 031, 039- 1, 2, 3 for KEPL Pumps, Model : 350x250 KSM(71L), Mark No : 120-P202A/B, Serv: HAN at ATP, M/c.No. :95004 & 5, Capacity: 550 m3/hr, Diff.Head:171 M, Imp. Dia.: 684mm, Speed: 1482 RPM, C.S.Drg.No. KS202-01-03-SHT2 Sleeve Bearing (Upper & Lower), Part No : 052, Matl. : ASTM A216 Gr.WCB + WM for KEPL Pumps, Model : 250x200 R2DM70L, Capacity : 350 M3/hr. (Normal), Disch. Pressure : 13.5 Kg/cm2, Suction Pressure : 0.88 Kg/cm2, Drg.No.KS-202-02-01-SHT-1- 6, Markno: 120-P-205, Serv : LAN Shipping, S.No.: 95006, Oil Ring, Part No : 067, Matl. : IS 318 Gr.11 for KEPL Pumps, Model : 250x200 R2DM70L, Markno:120-P205, Serv : LAN Shipping, S.No.: 95006, Drg.No.KS-202-02-01-SHT-1-6, Capacity : 350 M3/hr. (Normal) Disch. Pressure : 13.5 Kg/cm2, Suction Pressure : 0.88 Kg/cm2 Shaft with Keys, inclusive of:-, Matl.: Cr.Mo.St. ASTM A434 CL.BB (AISI4140), P/No. 031, Key (Impeller), Qty: 1, Matl.: Cr.St. ASTM A276 - Type 410 A, P/No. 039.1, Key (Coupling), Qty: 1, Matl.: C.S. ASTM A576 - Gr. 1045, P/No. 039.3, 090P009 A/B, KEPL - Model: 080 X 50 UCWM 35 - Sr No. 100298, 100299 - KEPL W/O No. SO326. Distance Sleeve, Part No. : 043 for KEPL Pumps, Model : 350x250 KSM(71L), Mark No : 120-P-202A/B, Serv: HAN at ATP, M/c.No. :95004 & 5, Capacity: 550 m3/hr, Diff.Head:171 M, Imp. Dia.: 684mm, Speed: 1482 RPM, C.S.Drg.No. KS202-01-03-SHT2 Sleeve Bearing (Upper & Lower), Matl : CS + WM, ASTM A 216 Gr. WCB + WM, Part No : 052, for KEPL Pumps, Model : 350 x 250 KSM71L, Sl.No : 95004 & 5, Mfg.Ref : KEPL/IND/202, Capacity : 550 M3/Hr, Diff Head : 171 Mt, Speed : 1482 RPM, Imp. Dia : 684 MM, CS Drg.No : KS-202-01-03-SHT2, Mark No: 120-P-202 A/B, Ser: High Aromatic Naphtha at ATP Total Quantity : 29. Last date of submission for this tender is 2024-08-31. This is a Couplings tender in Visakhapatnam, Andhra Pradesh