Construction, Andaman And Nicobar Islands Tender Results | Bidders, AOC & Contract Value | Page 999 | Tenderbook

TENDERBOOK

🎉 Your free trial plan has started. Plan will expire in 0 days

constructioncategories

andaman and nicobar islandsstates

Construction, Andaman And Nicobar Islands Tender Results | Bidders, AOC & Contract Value | Page 999 | Tenderbook

Andaman Public Works Dept

Andaman Public Works Dept has published Improvement Of Sitla Temple Junction At Gupatpara By Widening Of The Junction At Gupatpara By Widening Of The Junction Towards The Road Leading To New Manglutan Village And Providing Rcc Cover Slab Over The Drain Around The Junction Area. Last date of submission for this tender is 2025-09-25. This is a Road Work tender in South Andamans, Andaman And Nicobar Islands

South Andamans, Andaman And Nicobar Islands

Amount

Refer Docs

Contract date

Andaman Public Works Dept

Andaman Public Works Dept has published Demolition And Disposal Of 24 Nos Old Type-I Quarters Bearing No. A-13 To A-16, A-1 To A-12, A-17 To A-20, A-13/A To A-16/A At Police Colony Behind Ps Aberdeen, Port Blair (Without Land). Last date of submission for this tender is 2025-09-25. This is a Demolition Work tender in Port Blair, Andaman And Nicobar Islands

Port Blair, Andaman And Nicobar Islands

Amount

Refer Docs

Contract date

Andaman Public Works Dept

Andaman Public Works Dept has published Renovation Of Toilet Block Of ( Ane- Sagarika) In The Industrial Campus At Middle Point Under Pbnd, Apwd, Port Blair. Last date of submission for this tender is 2025-09-18. This is a Toilet Bathroom tender in Puram, Andaman And Nicobar Islands

Puram, Andaman And Nicobar Islands

Amount

Refer Docs

Contract date

Andaman Public Works Dept

Andaman Public Works Dept has published Annual Repair Maintenance of Road Under Sub-Division No.I, Cd, Apwd, Car Nicobar During The Year 2025-26 Repair Of Potholes And Maintenance Of State Highway From Mini Park Junction Near Iaf Gate To Kakana Village Between Chainage 0.00 Mtrs. To 4260.00 Mtrs. Under Sub- Division No.I Cd, Apwd, Car Nicobar.. Last date of submission for this tender is 2025-09-23. This is a Road Work tender in Port Blair, Andaman And Nicobar Islands

Port Blair, Andaman And Nicobar Islands

Amount

Refer Docs

Contract date

Public Works Department

Public Works Department has published Renovation Of 04 Nos Classroom Of Gps Hathi Tapu. Last date of submission for this tender is 2025-09-15. This is a Building Work tender in South Andamans, Andaman And Nicobar Islands

South Andamans, Andaman And Nicobar Islands

Amount

Refer Docs

Contract date

Andaman Public Works Dept

Andaman Public Works Dept has published Repair And Renovation Of Gpa Ty-Ii 23N/24N, 25N/26N At Vip Road, Campbell Bay. Last date of submission for this tender is 2025-09-05. This is a Road Work tender in Port Blair, Andaman And Nicobar Islands

Port Blair, Andaman And Nicobar Islands

Amount

Refer Docs

Contract date

Andaman Public Works Dept

Andaman Public Works Dept has published annual repair and maintenance of District road under Sub Division-I, CD, Campbell Bay during 2024-25. Sub Work:- Construction of Bus turning point near Bus Stand(9.05Km) at Govind Nagar, Campbell Bay.- 1 Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and for all lift, as directed by Engineer-in-charge. 2 All kinds of soil 3 Providingandlayinginpositioncementconcreteof specified grade excluding the cost of centering and shuttering - All work up to plinth level : 4 1:2:4 (1cement : 2 coarse sand (zone-Ill) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) 5 1:4:8 (1Cement : 4 coarse sand (zone-Ill) derived from natural sources: 8 graded stone aggregate 40 mm nominal size derived from natural sources) 6 Centering and shuttering including strutting, propping etc. and removal of form for 7 Foundations,footings,basesof columns,etc.formass concrete . Last date of submission for this tender is 2025-08-29. This is a Road Work tender in Nicobars, Andaman And Nicobar Islands

Nicobars, Andaman And Nicobar Islands

Amount

Refer Docs

Contract date

Andaman Public Works Dept

Andaman Public Works Dept has published Repair and Renovation of IRBn Barrack at Perka, Car Nicobar.SW:-Repair and Renovation of IRBn Barrack at Perka,Car Nicobar- 1 Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. 2 All kinds of soil. 3 Providingandlayinginpositioncementconcreteof specified grade excluding the cost of centering and shuttering - All work up to plinth level : 4 1:2:4 (1cement : 2 coarse sand (zone-Ill) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) 5 1:4:8 (1Cement : 4 coarse sand (zone-Ill) derived from natural sources: 8 graded stone aggregate 40 mm nominal size derived from natural sources) 6 Centering and shuttering including strutting, propping etc. and removal of form work for: 7 Foundations, footings, bases for columns 8 Retainingwalls, returnwalls,walls (anythickness) including attached pilasters, buttresses, plinth and string courses fillets, kerbs and steps etc. 9 Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15 degree landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). 10 Centering and shuttering including strutting, propping etc. and removal of form for 11 Shelves (Cast in situ) 12 Steelreinforcement forR.C.C.workincludingstraightening,cutting, bending, placing in position and binding all complete above plinth level. 13 Thermo-Mechanically Treatedbars of gradeFe-500D or more. 14 Providingandfixing 18mmthickgangsawcut,mirrorpolished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters,window sills,facias andsimilar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. complete at all levels. 15 Granite stone slab of colour black, Cherry/Ruby red 16 Area of slab over 0.50 sqm 17 Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3(1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. 18 Providing and fixing ISI marked aluminium butt hinges anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with necessary screws etc. complete: Note :- Aluminum hinges shall not be used in wooden shutters, stainless steel hinges shall be preferred. 19 125x75x4 mm 20 Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : 21 250x16 mm 22 Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 23 250x10 mm 24 Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : 25 125 mm 26 Providing and fixing factory made P.V.C. door frame of size 50x47 mm with a wall thickness of 5 mm, made out of extruded 5 mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos of 150 mm long brackets of 15x15 mm M.S. square tube, the vertical door frame profiles to be reinforced with 19x19 mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100 mm size, complete as per manufacturers specification and direction of Engineer- in-Charge. 27 35 mm thick factory made Solid panel PVC Door shutter, made out of single piece extruded soild PVC profiles, 5 mm (± 0.2 mm) thick, having styles & rails (except lock rail) of size 95 mmx 35 mm x 5 mm, out of which 75 mm shall be flat and 20 mm shall be tapered (on both side), having one side thickness of 15 mm integrally extruded on the hinge side of the profile for better screw holding power, including reinforcing with MS tube of size 40 mm X 20 mm x 1 mm, joints of styles & rails to be mitered cut & joint with the help of PVC solvent cement, self driven self tapping screws & M.S. rectangular pipes bracket of size 190 mm X 100 mm of cross section size 35 mm x 17 mm x 1 mm at each corner. Single piece extruded 5 mm thick solid PVC Lock rail of size 115 mm x 35 mm, out of which 75 mm to be flat and 20 mm to be tapered at both ends, having 15 mm solid core in middle of rail section integrally extruded, fixing the styles & rails with the help of solvent and self driven self tapping screws of 125 mm x 11 mm, including providing 5 mm Single piece solid PVC extruded sheet inserted in the door as panel, all complete as per manufacturers specification and direction of Engineer-in-charge. 28 Non decorative finish (matt finish) 29 Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. 30 Electric resistance or induction butt welded tubes 31 Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. 32 Ingratings,frames,guardbar,ladder,railings,brackets, gates and similar works 33 Cement concrete pavement with 1:2:4(1 cement: 2 coarse sand :4 graded stone aggregate 20 mm nominal size), including finishing complete. 34 Providing andlayingCeramic glazed floor tiles of size 300x300mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement :4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete. 35 Providing and laying vitrified floor tiles in diferent sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. 36 Size of Tile 600x600 mm 37 Providing and fixing on wall face unplasticisedRigidPVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 38 110 mm diameter 39 Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS :5382, leaving 10 mm gap for thermal expansion. 40 Single tee with door 41 110x110x110 mm 42 Bend 87.5° 43 110 mm bend 44 12 mm cement plaster of mix: 45 1:4(1 cement: 4 fine sand) 46 12 mm cement plaster finished with a floating coat of neat cement of mix: 47 1:3(1 cement: 3 fine sand) 48 Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of approved manufacturer and of required shade and colour all complete to achieve even shade and colour: 49 New work(twoormorecoats)over andincludingwater thinnable priming coat with cement primer having VOC content less than 50 gram/litre 50 Finishing walls with Acrylic Smooth exterior paint of required shade: 51 New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm) 52 Painting with black anti-corrosive bitumastic paint of approved brand and manufacture to give an even shade: 53 Two or more coats on new work 54 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: 55 One or more coats on old work 56 Finishing walls with Acrylic Smooth exterior paint of required shade: 57 Old work (Two or more coat applied @ 1.67 Itr/ 10 sqm) on existing cement paint surface 58 Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: 59 Float glass panes of nominal thickness 5 mm (weight not less than 12.5kg/sqm) 60 Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: 61 White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests 62 Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : 63 W.C. pan with ISI marked white solid plastic seat and lid 64 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: 65 White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap 66 Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : 67 Kitchen sink without drain board 68 610x510 mm bowl depth 200 mm 69 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. 70 Semi rigid pipe 71 32 mm dia 72 Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. 73 Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 74 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms. 75 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work 76 20 mm nominal dia Pipes 77 25 mm nominal dia Pipes 78 40 mm nominal dia Pipes 79 Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 80 25 mm nominal bore 81 Providing and fixing uplasticised PVC connection pipe with brass unions : 82 30 cm length 83 15 mm nominal bore 84 Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : 85 150 mm diameter 86 Providing and placing on terrace (at all floor levels) polyethylene water storagetank,IS : 12701marked,withcoverandsuitablelocking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. 87 Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. 88 15 mm nominal bore 89 Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. 90 15 mm nominal bore 91 Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 92 15 mm nominal bore 93 Providing and fixing PTMT soap Dish Holder having length of 138 mm, breadth 102 mm, height of 75 mm with concealed fitting arrangements, weighing not less than 106 gms. 94 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fastenersto be paid for separately) : 95 For fixed portion 96 Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) 97 Providing and fixing anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-charge. (Only weight of grill to be measured for payment). 98 Providing and fixing 100 mm Stainless steel grating for gully trap. 99 Providing and fixing fly proof Polymex mosquito net of netlon or equivalent make to windows and clerestory windows as per the direction of Engineer in Charge. 100 Providing and fixing pre-painted galvalume (PPGL) steel profile sheets AZ-150 of brand Tata Bluescope steel, Everest Industries Ltd., JSW Steel Ltd., Jindal India Ltd. or equivalent (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with aluminium zinc coating 150 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping aluminium screws (Xylan) of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 101 Providing and fixing pre-painted galvalume (PPGL) steel profile sheets AZ-150 of brand Tata Bluescope steel, Everest Industries Ltd., JSW Steel Ltd., Jindal India Ltd. or equivalent (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05 %) total coated thickness with aluminium Zinc coating 150 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete : 102 Ridges plain (500- 600mm) 103 Gutter (600 mm over all girth) . Last date of submission for this tender is 2025-08-28. This is a Barrack tender in Nicobar, Andaman And Nicobar Islands

Nicobar, Andaman And Nicobar Islands

Amount

Refer Docs

Contract date

Rural Development Department

Rural Development Department has published Repair And Maintenance Of Platform Parking Area Infront Of The Gram Panchayat Kadamtala Including Repair Of Passage Adjcent To Panchayat Building In Between New Panchayat Shopping Complex And Vegetable Market Ward No 08 Under Gram Panchayat,Kadamtala. Last date of submission for this tender is 2025-06-24. This is a Shed Construction tender in Kadamtala, Andaman And Nicobar Islands

Kadamtala, Andaman And Nicobar Islands

Amount

Refer Docs

Contract date

Rural Development Department

Rural Development Department has published Repair And Maintenance Of Rural Road From Shri.Y Kunjappan House To Bijoy Bhakta House Ward No. 04 Under Gram Panchayat, Kadamtala.. Last date of submission for this tender is 2025-04-10. This is a Road Work tender in Kadamtala, Andaman And Nicobar Islands

Kadamtala, Andaman And Nicobar Islands

Amount

Refer Docs

Contract date

Disclaimer: Tenderbook takes every possible care to ensure the accuracy and authenticity of the tender information published on the platform. However, users are requested to verify the details from the original Tender Notice or Tender Document issued by the respective tendering authority before making any decisions or taking action related to a tender. We are not liable for any loss or damages arising from its use. For any corrections or feedback, connect with us at contact@tenderbook.in